|
|
odel of the Batpod from Christopher Nolan’s Dark Knight movie. Features remote-controlled drive, steering and Lifelites LED kit.
Datasheet:
Completion date: 30/08/2014
Power: electric (8878 battery)
Dimensions: length 48 studs / width 12 studs / height 12 studs (without Batman)
Weight: 0.54 kg (0.625 kg with Batman)
Suspension: none
Propulsion: 1 x PF L motor
Motors: 1 x PF L motor, 1 x PF M motor
The original Batpod is my least favorite Batman’s vehicle in the whole Christopher Nolan’s trilogy. It feels unrealistic and far-fetched to say least, and comes as a sort of a disappointment after the awesome Tumbler. Yet the moment I first saw the 76023 Tumbler set with the realistic front tires, I decided to build a Batpod model. With these tires now available, there will be no doubt a number of excellent, great-looking Batpod models in the coming months – so I just wanted to make one that works.
On the mechanical side, the model was plain and simple, with two motors sitting in the back and the 8878 battery in the front. A PF L motor was driving a double wedge belt wheel with tire, which was pressed to the Batpod’s rear tire, thus bypassing its axle and driving the rear wheel directly. A PF M motor was driving a single small linear actuator, which was making the front wheel turn left and right. The original Batpod is supposedly articulated near the middle, but there is no convincing demonstration of it in the movie, and it would be extremely difficult to make all the mechanics fit in a two-piece chassis. Additionally, a Lifelites LED kit was installed in four of the front cannons.
On the aesthetic side, it was clear from the start that the scale would require some compromises – the battery alone takes almost half of the chassis. I have therefore attempted to accurately model the front and rear wheel area, and fit the mechanics in the middle. The Batpod’s middle part looks very chaotically in the movie, so I compacted all the necessary working components as tightly as I could and covered them with Hero Factory and Bionicle elements to keep the chaotic appearance. The silhouette of the Batpod was thus different than in original, but its front, rear and top looked reasonably accurate.
While waiting for the 76023 set, I have calculated that the model would look empty without and driver, and that it should be just the right size for a large Batman figure from the 4526 Batman set to ride. This proved true, although I decided to remove the weird spiked “cape” of the original figure and to replace it with a custom one, which I cut out from a plain black flag.
The resulting model proved surprisingly stable, and the tires added a lot to its appearance. Its unusual construction made it very interesting to play with – I think I’ve never had so much fun with a Lego motorcycle before. And the expressions on the faces of policemen who passed me driving it on an empty street at 2 AM were truly priceless
|
上一篇：练手兵人下一篇：喵王指挥官
|
发表于 2014-9-10 17:33
楼主
发表于 2014-9-10 17:46
